High Pressure Components

Needle Valves

High-Pressure Needle Valves Fitok

Product Features:

  • Non-rotating stem and bar stock body design.
  • Metal-to-metal seating achieves ideal shutoff, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles.
  • The standard packing material for 60N Series is Nylon, the other Series is PTFE. RPTFE glass, graphite and extend stuffing box valve with graphite are also available.
  • Extend stuffing box valve with of Graphite can be operated to 1200°F (649°C).
  • The location of packing is under the thread of valve stem.
  • The material of packing gland and stem sleeve have been selected to achieve reduced handle torque and extended thread cycle life.
  • Options for Vee or Regulating stem tips.
  • Five flow patterns are available.

Check Valves

High-Pressure Check Valves Fitok

Product Features:

  • Provides unidirectional flow and tight shut-off for liquid and gas with high reliability.
  • When differential drops below cracking pressure, valve shuts off (Not for use as relief valve).
  • Resilient O-ring seat design for noise-free closing leakage-free.
  • Cracking pressure: 20 psig (1.38 bar) ±30%

Metering Valves

High-Pressure Metering Valves Fitok

Product Features:

  • The design of Barrel and Thimble micrometer permits repeatable settings. Each division of barrel equal to 0.025". Thimble is divided into 25 divisions, each division of thimble equal to 0.001" stem travel. One revolution equal to valve stem 0.025" travel.
  • Precise Metering valves are not intended for use as shut-off valves. The minimum flow rate is factory set at "0"position. The valve will be damaged when the valve operated below "0" position. When shutoff is required, a correlated shutoff valve from 15B, 20B, 15N, 20N, 30N and 60N series valve should be installed series with the Precise Metering Valves.
  • The location of packing is under the thread of valve stem.
  • Reliable locking device of packing gland design.
  • Extend stuffing box valve with of Graphite can be operated to 1200°F (649°C).

Ball Valves

High-Pressure Ball Valves Fitok

Product Features:

  • One-piece, trunnion mounted style, ideal for severe duty applications.
  • Two-way and three-way valve configurations.
  • PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion.
  • Full-port flow path minimizes pressure drop.
  • Optional o-rings available for high-temperature applications.

Double Block and Bleed Ball Valve

  • Working temperature range from 0°F to 400°F (-17.8°C to 204°C) with Fluorocarbon FKM O-rings, other O-ring materials available
  • High tensile 316 Stainless Steel body material
  • Carbon filled PEEK seats to offer excellent resistance to chemicals, heat and abrasion
  • One piece, trunnion mounted stem design
  • Full-port flow path to minimize pressure drop
  • Vee-stem vent valve
  • Wide selection of tube and pipe end fittings available
  • Quarter turn from open to close with positive stop

Double Block and Bleed Needle Valve

Block and Bleed Needle Valve
  • Compact design provides large valve performance in a small package
  • Reduced potential for leakage
  • Metal-to-metal seating achieves ideal shutoff, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles
  • Non-rotating stem and bar stock body design
  • Selected materials of packing gland and upper stem for reduced handle torque and extended thread cycle life
  • Packing located under stem threads
  • Reliable locking device for packing gland
  • Wide selection of tube and pipe end fittings available

High Pressure Bleed Valve

Bleed Valve for High Pressure
  • One piece hex construction compact design allows easy installation
  • Working temperature range: -20°F to 400°F (-29°C to 204°C)
  • 1/8“ Female NPT outlet connection
  • Easy to assemble and replace O-ring
  • Positive locking screw design prevents accidental removal of the stem
  • Tee handle for easy operation 

Pressure Gauge Valve

Gauge Valve for high Pressure
  • One inlet, three outlet ports.
  • Metal-to-metal seating achieves ideal shutoff, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles
  • Selected materials of packing gland and upper stem for reduced handle torque and extended thread cycle life Packing located under stem threads
  • Reliable locking device for packing gland

Block and Bleed Needle Valves

Block and Bleed Needle Valves
  • Compact design offers advantages over configurations with multiple valves and fittings
  • Minimal space needed for installation and operation
  • Cost savings from fewer components required
  • Reduced potential for leakage
  • Metal-to-metal seating achieves ideal shutoff, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles
  • Non-rotating stem and bar stock body design
  • Selected materials of packing gland and upper stem for reduced handle torque and extended thread cycle life
  • Packing located under stem threads
  • Reliable locking device for packing gland